Testing interface modules connected to the Synergis Cloud Link unit

2023-01-25Last updated

You can test your hardware connections and configuration by monitoring their responses on the I/O diagnostics page of the Synergis™ Appliance Portal in real time.

Procedure

  1. Log on to the Synergis Cloud Link unit.
  2. Click I/O diagnostics > Interfaces .
    Interfaces page of the Synergis™ Appliance Portal showing the options under an expanded interface module.
  3. Click Down arrow to expand the interface you want to monitor.
  4. Activate the devices (card readers, door sensors, door locks, and so on) connected to the Synergis Cloud Link unit through the interface modules.
    If they do not behave as expected, check your connections and your interface module configurations.