LED feedback
2022-03-03Last updated
The LEDs on the Synergis™ Cloud Link appliance provide visual feedback on system status and operation.
| Group | LED name | LED color | Description |
|---|---|---|---|
| General | Information ( ) |
Orange: solid | Synergis Cloud Link software not started |
| Green: solid | Synergis Cloud Link software started | ||
| Green: 2 blinks per second | Connecting to Access Manager | ||
| Green: 5 blinks per second | Firmware upgrade in progress Important: Do not
power cycle or power down the Synergis Cloud Link appliance while the
Information ( ) LED is flashing green. Doing so might result in serious
damage to the unit. |
||
| Orange: solid 3 seconds | DIP switch code recognized | ||
| Red: 3 slow blinks | DIP switch code not recognized | ||
| Red: blinking | Partial factory reset in progress | ||
| Red: solid | Full factory reset in progress | ||
| Green: blinking 1 second | Enable/disable IO Diagnostics page | ||
| Power | Blue: solid | ON when 12 V dc or PoE power is applied | |
| RS-485 | RX | Red: blinking | Receiving data |
| TX | Green: blinking | Transmitting data | |
| Ethernet ports | 1, 2 | Green | 1000BASE-T link is established. Flashes when there is activity. |
| Yellow | 10BASE-T or 100BASE-TX link is established. Flashes when there is activity. | ||
| PoE | Yellow: solid | ON if Synergis Cloud Link is being powered from a Power over Ethernet (PoE) source connected to Ethernet port 1. |